CH-530

CH-530
  • Bed is made of meehanite and is hardened and precisely ground, Hardness is HS 70 degree.
  • Automatic and manual forced Lubrication pump supplies oil to cross slide and bedways.
  • Oil distributor may be adjusted to lubricate bedway, cross slide, or both.
  • Starting lever with safety device.
  • Emergency foot-operated braking system.
Capacity
Swing over bed 532 mm
Swing over carriage 368 mm
Swing over gap 710 mm
Width of gap in front of face plate 150 mm
Distance between centers ( A1 - 6, A2 - 6 ) 767, 1067, 1667 mm ( A1 - 6, A2 - 6 )
Width of bed 300 mm
Stroke of tool post 145 mm
Stroke of cross slide 265 mm
Headstock
Spindle bore 58 mm ( 78 mm ) *
Taper of spindle bore & center MT6 x MT4
Spindle nose 12
Number of spindle speeds A1 - 6, D1 - 6 ( A2 - 6 ) *
Spindle speed ( 60 HZ ) ø 58 mm : 35, 52, 75, 110, 160, 230, 330, 490, 650, 950, 1350, 2000 rpm
ø 78 mm : 29, 43, 62, 90, 130, 190, 275, 405, 540, 790, 1120, 1650 rpm
Threading & Feeds
Number of feeds 36
Range of longitudinal feeds metric 0.037 ~ 1.04 mm / rev ( P = 6 mm)
0.035 ~ 0.98 mm / rev ( 4 TPI )
Range of cross feeds Half of longitudinal feeds
Leadscrew diameter 35 mm
Leadscrew pitch 4 TPI , P = 6 mm
Range of inch pitches 2 ~ 72 TPI ( 44 Kinds )
Range of metric pitches 0.2 ~ 14 mm ( 39 Kinds )
Tailstock
Quill stroke 170 mm
Quill diameter 60 mm
Quill taper MT # 4
Motor
Main motor ( 30 min. ) 5 HP ( 7.5 HP ) *
Coolant pump motor 1 / 8 HP
Height 1400 mm
Floor space 2000, 2300, 2900 × 1000 mm
Weight 1600, 1700, 1900 kgs
  • Specifications are subject to change without notice.