CHK-1020
| Swing over bed | Ø1020 |
| Swing over carriage | Ø770 |
| Swing over gap | Ø1290 |
| Max. turning diameter | 770 mm |
| Length of gap in front of face plate | 265 mm |
| Distance between centers | MT5: 1500, 2000, 2500, 3500, 4500, 5500, 6500, 7500, 8500 ------------------------ MT6: 1430, 1930, 2430, 3430, 4430, 5430, 6430, 7430, 8430 |
| Width of bed | 560 mm |
| Stroke of tool post | 230 mm |
| Stroke of cross slide | 510 mm |
| Spindle bore | 105 mm (4") / 153 mm (6") |
| Spindle nose | A2-8 / A2-11 |
| Spindle speed | 15-1000 rpm (4P) / 10-700 rpm (6P) |
| Taper of spindle bore & center | Ø105: MT7 x MT5 / Ø153: MT7 x MT6 |
| Number of spindle speeds | 12 |
| Range of longitudinal feeds | 0.05-0.7 mm/rev |
| Range of cross feeds | 0.025-0.35 mm/rev |
| Rapid travel X / Z | X Axis: 1.8 M/min / Z Axis: 3.7 M/min |
| Inch threads | 2-28 Thread/in, (D.P. 4-56) |
| Metric threads | 0.8-14 mm / Thread (M.P. 0.4-7) |
| Leadscrew | 45 mm (1 3/4") x 2 TPI, P12 mm |
| Quill diameter | Ø125 mm |
| Quill travel | 270 mm |
| Taper of quill center | MT6 |
| Spindle motor | 20 HP (6P) ------------- 25 HP (4P) |
| Coolant pump motor | 1/8 HP |
| Machine length | 6160 |
| Machine W x H (mm) | 1700(max) x 1900 |
| Machine Weight (kgs) | 5250, 5700, 6100, 7000, 7900, 8750, 9600, 10500, 11350 |
- Specifications are subject to change without notice.
The bed is designed with double“V” slideways for increased turning accuracy and straightness. In addition to the highly rigid bed structure, the foundation bolts are also strengthened making the bed more stable during turning operations.
With the special enhancement on the tailstock brake, the entire stability is increased when performing machining on an extra large shaft. MT5 or MT6 is optioned for tailstock quill taper application.
All models of the CHK series can be equipped with an optional high torque motor in combination with the highly rigid bed, fully exhibiting extra powerful heavy cutting capacity.
All models of the CHK series are in compliance with TS Mark in Taiwan,providing the operator with increased safety protection in machine operation.
The headstock employs a cam type speed change mechanism for reducing running noise. To use Japanese / European / American brand high quality bearings in the headstock provides a reduction of vibration during running.
| Swing over bed | Ø1020 |
| Swing over carriage | Ø770 |
| Swing over gap | Ø1290 |
| Max. turning diameter | 770 mm |
| Length of gap in front of face plate | 265 mm |
| Distance between centers | MT5: 1500, 2000, 2500, 3500, 4500, 5500, 6500, 7500, 8500 ------------------------ MT6: 1430, 1930, 2430, 3430, 4430, 5430, 6430, 7430, 8430 |
| Width of bed | 560 mm |
| Stroke of tool post | 230 mm |
| Stroke of cross slide | 510 mm |
| Spindle bore | 105 mm (4") / 153 mm (6") |
| Spindle nose | A2-8 / A2-11 |
| Spindle speed | 15-1000 rpm (4P) / 10-700 rpm (6P) |
| Taper of spindle bore & center | Ø105: MT7 x MT5 / Ø153: MT7 x MT6 |
| Number of spindle speeds | 12 |
| Range of longitudinal feeds | 0.05-0.7 mm/rev |
| Range of cross feeds | 0.025-0.35 mm/rev |
| Rapid travel X / Z | X Axis: 1.8 M/min / Z Axis: 3.7 M/min |
| Inch threads | 2-28 Thread/in, (D.P. 4-56) |
| Metric threads | 0.8-14 mm / Thread (M.P. 0.4-7) |
| Leadscrew | 45 mm (1 3/4") x 2 TPI, P12 mm |
| Quill diameter | Ø125 mm |
| Quill travel | 270 mm |
| Taper of quill center | MT6 |
| Spindle motor | 20 HP (6P) ------------- 25 HP (4P) |
| Coolant pump motor | 1/8 HP |
| Machine length | 6160 |
| Machine W x H (mm) | 1700(max) x 1900 |
| Machine Weight (kgs) | 5250, 5700, 6100, 7000, 7900, 8750, 9600, 10500, 11350 |
- Specifications are subject to change without notice.
